Care & Maintenance
Cleaning Instructions for Poly Furniture
To maintain the beauty of your furniture, clean it regularly using Berlin Gardens Xtreme Clean, or any generic composite deck cleaner which can be bought at Lowes or Home Depot. When cleaning Regular Colors do not use any cleaning product that contains Bleach except on White poly. Apply cleaner and let set for 10 minutes, then use soft bristle brush or sponge to scrub poly furniture. When completed rinse clean with warm water. If necessary reapply cleaner let set for 10 minutes then clean using a 1500 PSI high pressure washer. Do not place tip of high pressure washer closer than 8”-12” from the poly furniture to avoid marring the texture of your poly.
When cleaning WHITE poly furniture, use Berlin Gardens Mildew Stain Remover which contains bleach, or use a mixture of 1/3 cup of Outdoor Clorox Bleach, to 2/3 cup of water. Apply this mixture or the cleaner and let set for 10 minutes, then use soft bristle brush or sponge to scrub poly furniture. When completed rinse clean with warm water. If necessary reapply cleaner let set for 10 minutes then clean using a 1500 PSI high pressure washer. Do not place tip of high pressure washer closer than 8”-12” from the poly furniture to avoid marring the texture of your poly.
Cleaning Instructions for Berlin Gardens Cushions
When cleaning Berlin Gardens cushions use the Berlin Gardens Heavy Duty Fabric Cleaner. To clean the cushion spray evenly over the entire section of the cushion and let the cleaner penetrate for approximately 1 minute. Then with a sponge or a soft bristle brush, rub gently to lift the stain and then rinse the surface with water. Depending on the severity of the stain you may have to repeat these steps. It is recommended that you don’t spot clean the cushion and rather choose to clean the entire surface.
Before applying the Berlin Gardens Water Repel, make sure fabric is clean and dry. Wet the complete surface of the cushion and let dry for 6 hours before using. Do not fold or store treated until completely dry.
Proper Care and maintenance for (HPDE) Poly Furniture
Poly furniture is made from High Density Polyethylene (HDPE), a recycled plastic that will never need to be painted or stained. It will not rot or splinter, and it contains an added UV protective agent to resist fading. Poly Furniture is not affected by most corrosive substances and will not promote bacterial growth.
To maintain the beauty of your furniture, clean it regularly with Berlin Gardens Cleaning Products or a non-abrasive soap and water. While most colors need to be cleaned only several times per year using soap and water, certain colors such as white, (but not limited to this color) need to be cleaned frequently to maintain its original beauty. In extreme situations and with colors such as white, spray the furniture thoroughly with a non-abrasive cleaner, then scrub the furniture using a soft bristled brush and rinse off with warm clean water. If needed, spray the furniture with non-abrasive cleaner and wash it using a pressure washer ( not exceeding 1,500 PSI). Do not place the tip of your pressure washer closer than 8″ to 12″ from the furniture, or it will tear into the material.
Do not place flower pots or any items on the furniture that will leave stains. Do not place hot items directly onto the furniture to avoid melting.
All fasteners on furniture manufactured by Berlin Gardens are stainless steel with most fasteners being Chrome Plated. Chrome Plated Stainless Steel is a coated stainless steel and one of the most corrosive resistant fasteners on the market. However, in extreme conditions such as coastal areas, while Chrome Plated Stainless Steel will be less likely to rust, it is still recommended to regularly rinse it with fresh water to ensure the longevity of your furniture and fasteners.
If properly cared for, you will be able to relax in your fine piece of poly furniture for many years!
Proper Care and Maintenance for Donoma Fire Pits
Poly Material: Poly Fire Pits are made from High Density Polyethylene (HDPE), a recyclable plastic that will never need to be painted or stained. It will not rot or splinter, and it contains an added UV protective agent to resist fading. Poly material is not affected by most corrosive substances and will not promote bacterial growth.
Cleaning: To maintain the beauty of your Poly Fire Pit, clean it regularly with soap and water. Use only nonabrasive soaps. While most colors need to be cleaned only several times per year, certain colors such as White, (but not limited to this color) need to be cleaned frequently in order to maintain its original beauty. In extreme situations and with colors such as White, spray the material thoroughly with a nonabrasive cleaner then scrub using a soft bristle brush and rinse it off with warm clean water. If needed spray the Poly Fire Pit with a nonabrasive cleaner and wash it using a high-pressure washer. Do not place the tip of your pressure washer closer than 8″ to 12″, or it will tear into the poly material. Your pressure washer should not exceed 1,500 PSI.
Melting and Stains: A Glass Wind Guard must be installed on Fire Pits at all times to keep flames from touching the material and avoid melting. Lighting or burning a fire pit without the glass wind guard installed may result in melting of the poly material and thus voids this warranty. If any colored liquids such as wine, or soft drinks are spilled on your top, clean immediately to avoid possible stains. Do not place flower pots or any items that will leave stains on fire pit. Do not place hot items directly on the top to avoid melting.
Stainless Steel Components: Stainless Steel Heat Barriers used on Poly Tops to distance flames and heat from the material are 304 grade stainless steel and may rust in normal outdoor conditions and/or coastal areas. In extreme conditions such as coastal areas, it is recommended to regularly rinse Stainless Steel Components with fresh water to help prevent rusting. When not in use, covering your fire pit with a waterproof fire pit cover is recommended to minimize the chances of rust.
Burner: See page nine (9) of the Crystal Fire Manual included with the Burner. Carefully read and follow all warnings and instructions regarding use, service and maintenance.
Cleaning Instructions for Poly Furniture
To maintain the beauty of your furniture, we suggest you clean it regularly using Berlin Gardens Xtreme Clean, or any generic composite deck cleaner that you may find at Lowes or Home Depot. When cleaning Regular Colors do not use any cleaning product that contains Bleach except on White poly. Apply cleaner and let set for 10 minutes, then use soft bristle brush or sponge to scrub poly furniture. When completed rinse clean with warm water. If necessary reapply cleaner let set for 10 minutes then clean using a 1500 PSI high pressure washer. Do not place tip of high pressure washer closer than 8”-12″ from the poly furniture. This will avoid marring the texture of your poly.
What about White Poly Furniture?
When cleaning WHITE poly furniture, use Berlin Gardens Mildew Stain Remover which contains bleach, or use a mixture of 1/3 cup of Outdoor Clorox Bleach, to 2/3 cup of water. Apply this mixture or the cleaner and let set for 10 minutes, then use soft bristle brush or sponge to scrub poly furniture. When completed rinse clean with warm water. If necessary reapply cleaner let set for 10 minutes then clean using a 1500 PSI high pressure washer. Do not place tip of high pressure washer closer than 8”-12” from the poly furniture. This will avoid marring the texture of your poly.
Cleaning Instructions for Berlin Gardens Cushions
When cleaning Berlin Gardens cushions use the Berlin Gardens Heavy Duty Fabric Cleaner. To clean the cushion spray evenly over the entire section of the cushion. Let the cleaner penetrate for approximately 1 minute. Then with a sponge or a soft bristle brush, rub gently to lift the stain. Finally, rinse the surface with water. Depending on the severity of the stain you may have to repeat these steps. We recommend you clean the whole surface of the cushion rather than spot cleaning.
Before applying the Berlin Gardens Water Repel make sure fabric is clean and dry. Wet the complete surface of the cushion and let dry for 6 hours before using. Do not fold or store treated until completely dry.
Proper Care and maintenance for (HPDE) Poly furniture
Poly furniture is made from High Density Polyethylene (HDPE). HDPE is a recycled plastic that will never need to be painted or stained. It will not rot or splinter, and it contains an added UV protective agent to resist fading. Poly Furniture is not affected by most corrosive substances and will not promote bacterial growth.
To maintain the beauty of your furniture, clean it regularly with Berlin Gardens Cleaning Products or a non-abrasive soap and water. Most colors need to be cleaned only several times per year using soap and water. However, certain colors such as white, (but not limited to this color) should be cleaned frequently to maintain its original beauty. In extreme situations and with colors such as white, spray the furniture thoroughly with a non-abrasive cleaner. Then scrub the furniture using a soft bristled brush. Finally, rinse off with warm clean water. If needed, spray the furniture with non-abrasive cleaner and wash it using a pressure washer ( not exceeding 1,500 PSI). Do not place the tip of your pressure washer closer than 8″ to 12″ from the furniture. Doing so can tear into the material.
Don’t place flower pots or any items on the furniture that will leave stains. Refrain from placing hot items directly onto the furniture to avoid melting.
All fasteners on furniture manufactured by Berlin Gardens are stainless steel with most fasteners being Chrome Plated. Chrome Plated Stainless Steal is a coated stainless steel and one of the most corrosive resistant fasteners on the market. However, in extreme conditions such as coastal areas, while Chrome Plated Stainless Steel will be less likely to rust, we recommended you regularly rinse it with fresh water to ensure the longevity of your furniture and fasteners.
If properly cared for, you will be able to relax in your fine piece of poly furniture for many years!
Proper Care and maintenance for for Donoma Fire pits
Poly Material: Poly Fire Pits are made from High Density Polyethylene (HDPE). HDPE is recyclable plastic that will never need to be painted or stained. It will not rot or splinter, and it contains an added UV protective agent to resist fading. Poly material is not affected by most corrosive substances and will not promote bacterial growth.
Cleaning: To maintain the beauty of your Poly Fire Pit, clean it regularly with soap and water. Use only nonabrasive soaps. While most colors need to be cleaned only several times per year, certain colors such as White, (but not limited to this color) need to be cleaned frequently in order to maintain its original beauty. In extreme situations and with colors such as White, spray the material thoroughly with a nonabrasive cleaner. Then scrub using a soft bristle brush. Finally, rinse it off with warm clean water. If needed spray the Poly Fire Pit with a nonabrasive cleaner and wash it using a high-pressure washer. Do not place the tip of your pressure washer closer than 8″ to 12″. Doing so will tear into the poly material. Your pressure washer should not exceed 1,500 PSI.
Melting and Stains: A Glass Wind Guard must be installed on Fire Pits at all times to keep flames from touching the material and avoid melting. Lighting or burning a fire pit without the glass wind guard installed may result in melting of the poly material. Doing so voids this warranty. If by chance you spill any colored liquids such as wine, or soft drinks on your top, you should clean it immediately to avoid possible stains. Do not place flower pots or any items that will leave stains on fire pit. Do not place hot items directly on the top to avoid melting.
Stainless Steal Components: Stainless Steel Heat Barriers used on Poly Tops to distance flames and heat from the material are 304 grade stainless steel. It may rust in normal outdoor conditions and/or coastal areas. In extreme conditions such as coastal areas, we recommended that you regularly rinse the Stainless Steel Components with fresh water. This will help prevent rusting. When not in use, we suggest covering your fire pit with a waterproof fire pit. Covering will minimize the chances of rust.
Burner: See page nine (9) of the Crystal Fire Manual included with the Burner. Carefully read and follow all warnings and instructions regarding use, service and maintenance.
